Modified 2014 Honda City with Vossen rims and blacked out lights, grillesand logo

2014 Honda City with smoked headlights and Vossen rims

The 2014 Honda City looks quite good already in my opinion, but being a car enthusiast I thought it lacked certain things. I wondered how the 2014 Honda City would look with modified Vossen rims, blacked out Honda emblem, grille, smoked headlights, and darker tint.

This was the end result! It looks like an Ah Beng version of the 2014

Volvo 740 Convert to Rolls Royce Phantom

Volvo 740 Convert to Rolls Royce Phantom? Well, close enough! I'm not sure if it is a Volvo 740, 850 or 940 (Volvo enthusiasts, you tell me!), but it looks closer to a Volvo 740. From several feet away, this Volvo looks like a Rolls Royce Phantom! However the rear gives it away totally, as it doesn't get any extravagant body kit makeover like the front.




Sporting a set of 18 or 19 inch rims,

1990s Proton Saga convertible and Proton Saga Iswara station wagon

A custom made 1990s Proton Saga convertible. Not sure if this can be categorised as a convertible as there does not seem to be any mechanism to bring up a roof. Anyone have the whole story behind this Proton Saga with its roof removed?







How about a Proton Saga Iswara station wagon? This one looks like it was nicely done! 






And another Proton Iswara convertible, but this time for

Proton Preve steering on other Proton cars

Proton Preve steering on other Proton cars, specifically my Proton Saga FLX! Since I bought the cheapest spec version, it came without the leather steering wheel, which gets slippery at times and feels rather uncomfortable. To get the original steering wrapped outside, I was quoted anywhere from RM350 to RM400! So instead, I got the Proton Preve leather steering wheel, at a fraction of the price

Proton Wira modified into BMW

Proton Wira to BMW 3 Series conversion. Very intense!


If you look closely, this is actually a Proton Wira and not a BMW 3 series E46! The owner somehow managed to integrate the BMW bonnet, signature BMW kidney grille, E46 bumpers, and also the 3 series head lights. However, upon closer inspection, the headlights appear to be Proton Wira headlights with shrouds and eyelids to give the

Proton Saga FLX Campro 1.3 to 1.6 conversion

Proton Campro 1.3 convert to 1.6




Do you own a 1.3-Litre Campro Proton Saga FLX, Saga BLM, Saga FL, or Satria Neo? You can actually convert the 1300CC Campro engine to 1600CC Campro and get an extra 300cc! What does this extra 300cc of Campro power bring you? Well for starters, with the Campro 1.3 convert to 1.6, you will get about 14 extra horsepower and 30Nm of torque. No replacement for

550PS New Audi R8 V10 Plus: 0-100km/h in 3.5 seconds!

Audi’s R8 has been given a tune, dubbed as the Audi R8 V10 Plus, revealing 550PS from its 5.2-litre V10
engine. In comparison, the standard R8 V10 quattro produces 525bhp (532ps) from
the same 5.2-litre V10 engine.



0-100km/h (0-62mph) is done in 3.5 seconds now, which was 3.7 seconds
previously. At this calibre of performance, a 0.2 second is no easy feat!




 Top speed is now

Toyota IQ with GTR R35 wide body conversion

While most people with body kit conversions tries to modify them to replicate another car (possibly hoping to trick people), the Toyota IQ with a Nissan GTR R35 conversion does not actually pretend to be a GTR 35. Instead, it fascinates passer-bys with its cute outlook and un-proportionate dimensions, achieving the same effect a baby would have on women. Continue reading for more baby GTR

Used Car Review: Proton Wira

Most value for money modification platform, or just a daily ride. The Proton Wira offers unlimited potential.


Me and my brother's project car. About 200whp from a Mitsubishi 1.6-Litre 4G92 Bolt on Turbo engine.

Looking for a used sedan that is affordable and easy to maintain? The Proton Wira has decent leg room and a generous boot space. And for an aged car, the outlook is still

Proton Saga FLX 1.3 Manual Bolt on Turbo

It has a been a while; although I just got the car for around 7 months, I decided to add on a bolt on turbo system to the car.

The 1.3L Campro is running on a TD04 from a Subaru (13T if I'm not mistaken). Didn't boost much, as the management is still not installed yet. Planning to go for Works EMS! Overall the project was cost efficient and neat, running on 2 inch custom made intercooler piping

Fiat Coupe 20VT with Custom SD Aerodynamic Bodykit!

The Fiat Coupé (type 175, officially titled the Coupé Fiat) was a coupé produced by the Italian manufacturer Fiat between 1993 and 2000. In Malaysia, the name Fiat has receieved quite a notorious reputation for being a high maintenance Italian make. In fact, most Non-Asian makes such as BMW, Mercedes, Volvo etc has also recieved the same reputation of being high maintenance. Despite this,

Modification: Headlight conversions - Better or Worse?

Some cars have undergone different headlight conversions for many reasons, such as availability of older flip up headlight mechanism or for pure aesthetic purposes. Some of these conversions look much better than stock form in my opinion, and without further ado, you shall be the judge with the following conversions:


Original: Mazda Familia 323F / Astina














Conversion: (Headlight

Kit Cars: Taking Replicas Seriously

Introduction: Kit Cars




        So you can't quite afford a Ferrari 355, 360, Lamborghini Murcielago; well, kit cars replicate the genuine super cars and exotics for a fraction of the original price. These days, kit cars are becoming so refined that they are able to be inter fitted to the real thing. That is to say, in case your genuine Murcielago is involved in a crash, and genuine

HKS ES exhaust for my Wira 1.6 Bolt on Turbo

I recently got bored of my exhaust and coincidentally, my friend changed his exhaust setup. Thus, I purchased his old setup for a good price (Thanks buddy)! The "new" exhaust is a HKS ES wagon straight flow muffler with 2.5 inlet. The old setup was an Everco Topcat S-Flow muffler. After receiving the exhaust from my friend, I proceeded to Under6ix Exhaust, in Bandar Sunway, 46150 Petaling

Modification: Compilation of some extreme bodyworks

The pictures are collected over a few months of surfing the net, thus the proper references could not be made! However, if the picture is yours and you would like credit for it, kindly let me know! Thanks and enjoy the pictures!



Honda Prelude BB1-BB4 Widebody kit visualization






Toyota Celica ST183-ST185 Fender Arches and custombodykit










Looks like some hybrid Nissan Silvia front

Extreme Modification: Nissan Maxima (Nissan Cefiro) converted to BMW 7 series!

This showcar was built off a Nissan Maxima. In Malaysia, the Nissan Maxima is sold as the Nissan Cefiro.  Featuring a BMW 7 series front body parts, and also features a BMW M3 bumper. If that is not enough, the front doors open Lamborghini style, and the hoods open up by splitting in 2. The rear is still authentic JDM though; it features a Toyota Supra wing. This car is uniquely refreshing yet

Modification: Honda NSX to Ferrari F50

This is one slick transformation! The Honda NSX itself is pretty sporty already though, and I'd rather leave it as it is. 

Proton Satria Neo with oversized rims!

This Proton Satria Neo sports a rim that is so large, it actually protrudes out of the fenders (what fenders?). This car was spotted entering the Sunway Pyramid Car park. The car bounced vigorously whenever it crawled over those unforgiving bumps. The suspension setup was REALLY hard. The owner's wife and kids was bouncing around inside the car like bobble heads.






Well, the front and rear

Perodua Kancil + Nissan Skyline GTR34 = Cute sports car

This is quite a good photoshop Perodua Kancil and Nissan Skyline GTR34. I wonder if it was an actual car, what engine would it use? Haha. The car looks quite nice actually.






Close enough!



Keywords: Perodua Kancil, Nissan Skyline GTR, kancil modification

Clean Engine Bays : Wire tucked !

While many people pay attention to their car's exterior, the interior is often neglected. Car enthusiasts usually spice up their car's exterior with body kits, custom paint jobs, spoilers, diffusers etc. What comes to most car enthusiasts mind when we talk about interior modification? Usually performance gauges & meters, ICE, and the like. 






In recent trends, silicon hoses have become